[offer] How To Use Switches In Dynamips, use all commands, not just vlan database

All users of dynamips must have figured out by now that you can use NM16-ESW module for using switching commands on router, however, those are really restricted only to vlan database mode, however, not so now

Read this blog here :

CODE

http://ccie-in-3-months.blogspot.com/2008/05/how-to-use-extended-range-vlans-in-nm.html

Extract from the article :

QUOTE

In case that you don’t already know, in the latest IOS (> 12.4(15)T) you can use extended-range vlans (1006-4094) in your dynamips router/switch (using the NM-16ESW module). Also the vlan database mode is not recommended anymore and you can use the latest config-vlan submode. That way you can replicate more closely the various vendor labs.

I’m using a 3725 as switch, so this is its config in the net file:

The tricky part is that you don’t get any indication of this capability; it’s like a hidden command. But if you try to configure it, it’ll be accepted and it’ll work fine.

CODE

SW1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
SW1(config)#vlan ?
  accounting  VLAN accounting configuration
  ifdescr     VLAN subinterface ifDescr

passguide

SW1(config)#vlan 2567
SW1(config-vlan)#name VLAN-2567
SW1(config-vlan)#^Z
SW1#

Download the IOS that makes it possible here : c3725-adventerprisek9-mz.124-15.T5.bin

CODE

http://rapidshare.com/files/117544254/c3725-adventerprisek9-mz.124-15.T5.bin

Some people have been having issues with above link so here’s a mirror

CODE

http://rapidshare.com/files/118345204/c3725-adventerprisek9-mz.124-15.T5.bin

Bookmark and Share
passguide exams High quality Cisco, Microsoft, IBM, Oracle,Microsoft,Citrix,Vmware,HP,Juniper and other Certification exmas training materials are provided here at PassGuide Site

Download Free Cisco Dynagen Simulation Certification Braindumps

  1. Free dynamips-VLAN topology
  2. Free Change module under Dynamips
  3. Free Dynamips PPP lab
  4. Free 5 CCNA Certification Exam Dumps
  5. Free Best way to integrate PEMU with Dynamips
  6. Free CCIE Practice LAB Dynamips
  7. Free The BEST IEWB v4 Dynamips Topology
  8. Free offer latest testking cisco 642-811 exam
  9. Free Installing Ubuntu 8.04 & dynamips/dynagen
  10. Free Trunking physical switch to CCIE R&S Dynamips lab
Thursday, June 12th, 2008 Dynagen

2 Comments to [offer] How To Use Switches In Dynamips, use all commands, not just vlan database

  • Shahzad Mahmood says:

    Dear sir,

    It is really a great job u did bu offering the image of Cisco Switch. Thank you Very Much sir.

    If i want to do all the Router CCNP Practical in dynagen which ios should i use so that i may take less CPU and Memory Usage.
    and also please send me the link for the image and dynagen script.

    Thnaking tou

  • Ram says:

    Thanks for providing the switch software.. More detailed info provided in this one. Keep up the good work.

  • Leave a Reply